Synthesis of new hydrolyzable polyurethanes from L‐gulonic acid‐derived diols and diisocyanates

New polyurethanes with lactone groups in the pendants and main chains were synthesized by the polyaddition of two kinds of L ‐gulonolactone‐derived diols (2,3‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone and 5,6‐O‐isopropylidene‐L ‐gulono‐1,4‐lactone) with hexamethylene diisocyanate and methyl (S)‐2,6‐diisocyanatohexanoate and by the subsequent deprotection of isopropylidene groups. They were hydrolyzed more quickly than the polyurethane derived from methyl β‐D ‐glucofuranosidurono‐6,3‐lactone in a phosphate buffer solution, the pH value of which was 8.0, at 27 °C. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4158–4166, 2002     

Fragmentation study of peptides using Fourier transform ion cyclotron resonance with infrared multiphoton dissociation: experiment and simulation

In this study, the fragmentation of gas-phase protonated Angiotensin II is investigated using electrospray ionization (ESI), Fourier-transform ion cyclotron resonance (FT-ICR), and mass spectrometry (MS) with a laser cleavage infrared multiphoton dissociation (IRMPD) technique. The experimental results show that the spectra peaks for the photoproducts are y2/b6- and y7-type ions, corresponding to the cleavage of His-Pro and Asp-Arg in the parent amino acid sequence. The fragmentation of the peptide under collision-free vacuum conditions is modeled using molecular dynamics simulations (MD). The binding energy for the peptide bonds (C'-N bond) of Angiotensin II is estimated from ab initio calculations. The calculations are directed at predicting experimental measurements of the product ions from the photodissociation of the peptide. The product distributions simulated by the MD dissociation trajectories include predominantly y7/b1 and y2/b6 pair ions.     

Thermodynamics of Solvation of 18-Crown-6 and Its Alkali-Metal Complexes in Various Solvents

Heats of solution of 1,4,7,10,13,16-hexaoxacyclooctadecane (18-crown-6) in acetonitrile, 1,2-dichloroethane, N,N-dimethylformamide, dimethyl sulfoxide, nitromethane, propylene carbonate, pyridine and water were measured at 25 °C and the enthalpies of the transfer of 18-crown-6 from waterto the aprotic solvents were derived. The thermodynamic quantities, G₁°, H₁° and T S₁°, for the formation of the[M(18-crown-6)]⁺ (M⁺ = Na⁺, K⁺, Rb⁺, Cs⁺, NH₄ ⁺) complexeswere determined by titration calorimetry in dimethyl sulfoxide containing0.1 mol dm^-3 (C₂H₅)₄NClO₄ as a constant ionic medium at 25 °C. These thermodynamic quantities suggest that the complexationof 18-crown-6 with the alkali-metal ions mainly reflects the different solvationof 18-crown-6 and also the different degree of solvent structure.     

Monolithic octadecylsilyl-silica gel column for the high-speed ion chromatographic determination of acidity

A monolithic ODS-silica gel column modified by saturating it with lithium dodecylsulfate (Li-DS) was used to demonstrate the high-speed separation of H+ from other mono- and divalent cations, such as Na+, NH4+, K+, Mg2+ and Ca2+ using ion chromatography (IC). Using a 5 mM EDTA-2K solution containing 0.10 mM Li-DS (pH 4.80) as eluent, H+ was eluted with a sharp and symmetrical peak within 1.0 min before other cations at a flow-rate of 1.5 ml min(-1). The rapid elution of H+ and its conductimetric detection could be attributed to the presence of EDTA (HY2-), which can convert H+ ions as anions. i.e. H(+) + H2Y(2-) --> H3Y(-). The acidity of rainwater and deionized water samples was determined using this IC system with satisfactory results.     

Determination of monovalent inorganic anions in high-ionic-strength samples by electrostatic ion chromatography with suppressed conductometric detection

A new ion chromatographic (IC) system has been established by using micelles of 3-(N,N-dimethylmyristylammonio)propanesulfonate (Zwittergent 3-14) loaded onto a reversed-phase packed column as the separation column with an electronic rotary switching valve packed-bed suppressor for conductometric detection of inorganic anions. An aqueous H3BO3-Na2B4O7 solution has been demonstrated to be the most desirable eluent for this IC system. The relationship between retention time and the concentration of the borate eluent was determined for a series of model anionic analytes and this relationship was found to be opposite to that exhibited in a conventional anion-exchange IC system. The rapid elution and complete separation of monovalent inorganic anions were obtained by initially using a high-concentration borate solution as the eluent for a short-period, and then switching to a lower-concentration borate eluent to complete the separation. Detection limits for nitrite, bromide, nitrate, and chlorate were 0.85, 0.88, 0.95 and 4.8 microM, respectively, when a 7.0 mM Na2B4O7 eluent was used. Moreover, the ability to directly detect these monovalent anions in samples containing high concentrations of sulfate and/or chloride ions provided a major advantage of this approach.     

Preparation and characterization of carbonated barium-calcium hydroxyapatite solid solutions

Particles of carbonated barium-calcium hydroxyapatite solid solutions (BaCaHap) with different Ba/(Ba+Ca) (X(Ba)) atomic ratios were prepared by a wet method at 100 degrees C and characterized by various means. The crystal phases and structures of the products strongly depended on the composition of the starting solution, that is, the Ba/(Ba+Ca) atomic ratio ([X(Ba)]) and H3PO4 concentration ([H3PO4]) in the solution. BaCaHap with X(Ba)0.43 could be prepared at [X(Ba)]0.7 by changing [H3PO4], but could never be obtained at [X(Ba)]=0.8-0.95 regardless of [H3PO4]. The carbonated calcium hydroxyapatite particles prepared at [X(Ba)]=0 were fine and short rod-shaped particles (ca. 14x84 nm). With increasing [X(Ba)] from 0 to 0.8, the particles obtained became large spherical agglomerates. The carbonated barium hydroxyapatite particles formed at [X(Ba)]=1 were long rod-shaped agglomerates (ca. 0.2x2 microm) of fine primary particles. The amount of CO2 adsorbed irreversibly on a series of BaCaHaps showed a minimum at (Ba+Ca)/(P+C) atomic ratio of around 1.56, which agreed well with the minimum cation/P ratio obtained for the other hydroxyapatites, as already reported.     

Development of a new file search system for nuclear magnetic resonance spectra: Production of an Enlarged Data Base and Search Test

A practical search system for proton n.m.r. spectra is reported. The coding rules and search algorithms are described in detail. Data for 8000 spectra have been converted into a computer-readable file from printed charts. Several search tests are used to evaluate the usefulness of the search system, and various effects of experimental conditions such as different instruments, frequencies and solvents on recall efficiency are described. The results presented indicate that the system should be applicable to routine analytical work.     

Improved spectrophotometric determination of uranium(VI) with 4-(2-pyridylazo)resorcinol in the presence of benzyldimethylstearyltrimethylammonium chloride

An improved spectrophotometric determination of uranium(VI) is proposed using 4-(2-pyridylazo)resorcinol(PAR) in the presence of benzyldimethylstearyltrimethylammonium chloride(BSTAC) as a cationic surfactant. The calibration graph is linear in the range of 0.3-60 microg/10 ml uranium(VI), measuring the absorbance at 550 nm. The reproducibility for 19.0 microg/10 ml uranium(VI) is 0.57%. The third-derivative method using the third-derivative distance (d(3)A/dlambda(3)) among lambda(1) 530 nm, lambda(3) 594 nm and lambda(2) 565 nm was also investigated.     

DTA study of the chlorination of fly ash and bauxite in the presence of carbon

The chlorination processes of fly ash and bauxite in the presence of carbon were studied by means of a gas-flow type DTA, X-ray analysis and SEM observation, and the reactivity of Al-compounds as their constituents was compared. In the case of fly ash, the exothermic peak due to the formation of AlCl₃ (mainly) and FeCl₃ appeared at about 790–920°C. The reactivity of Al estimated from the DTA peak temperature depended on the particle size, carbon content and preparation temperature of fly ash, and was much lower than that of bauxite. Fractional conversion of Al was about 60–70%, when fly ash (?300 mesh) was heated up to 900°C in Cl₂ at 5°C min^?1 of heating rate. In the case of bauxite, two exothermic peaks due to the chlorination of Fe and Al appeared at about 270 and 490°C, respectively. The chlorination of Al was completed at 550°C under the above conditions.     

Palladium-catalyzed preparation of α-allyl esters and α,β-unsaturated esters from saturated esters via their silyl acetals

Reaction of ketene silyl acetals with allylic carbonates in the presence of palladium-phosphine catalyst in dioxane gives α-allyl esters in high yields. When the reaction is carried out with phosphine-free palladium catalyst in nitriles, α,β-unsaturated esters are obtained in good yields.